Ürün ayrıntıları:
Ödeme & teslimat koşulları:
|
Ürün adı: | GB 19083-2010 Yatay Sprey Cerrahi Maske Sentetik Kan Penetrasyon Test Cihazı | Püskürtme mesafesi: | (300 ± 10) mm |
---|---|---|---|
Test ortamı: | Temperature (21 ± 5) ℃; Sıcaklık (21 ± 5) ℃; relative humidity (85 ± 10)% ba | Sıvı fırlatma hızı: | 450cm / s; 450cm / s; 550 cm / s; 550 cm / s; 635 cm / s 635 c |
Meme çapı: | .80.84mm, uzunluk 12.7mm | güç: | AC220V 50HZ |
Vurgulamak: | aşınma direnci test makinesi,iplik büküm test cihazı |
GB 19083-2010 Yatay Sprey Cerrahi Maske Sentetik Kan Penetrasyon Test Cihazı
Genel bakış:
The mask synthetic blood penetration tester is suitable for the measurement of the synthetic blood spatter penetration performance of medical mask or other protection materials. Maske sentetik kan penetrasyon test cihazı, tıbbi maskenin veya diğer koruma malzemelerinin sentetik kan sıçraması penetrasyon performansının ölçümü için uygundur. It can be used by medical inspection departments, safety inspection departments and scientific research units. Tıbbi muayene departmanları, güvenlik muayene departmanları ve bilimsel araştırma birimleri tarafından kullanılabilir.
Geçerli standartlar
GB19083-2010: Tıbbi koruyucu maskeler için teknik gereksinimler;
YY 0469-2011: Cerrahi maskeler;
YY / T0691-2008: Bulaşıcı patojen koruyucu ekipman (sabit hacim, yatay sprey) için tıbbi maskelerin sentetik kan penetrasyonuna karşı test yöntemi
Principle
The medical mask sample was supported on the test device, and 2 mL of synthetic blood was sprayed from a cannula with an inner diameter of 0.84 mm in a horizontal direction toward the mask to be tested at a distance of 300 mm. Tıbbi maske numunesi test cihazında desteklendi ve 2 mL sentetik kan, 0.84 mm iç çapa sahip bir kanülden, test edilecek maskeye 300 mm mesafede yatay bir yönde püskürtüldü. Simulate the scene where the mask is sprayed with blood from the perforated blood vessels, and observe the penetration of synthetic blood on the other side of the mask. Maskenin delikli kan damarlarından kanla püskürtüldüğü sahneyi simüle edin ve maskenin diğer tarafındaki sentetik kanın nüfuzunu gözlemleyin. The medical mask samples were tested at the liquid ejection speeds of 450 cm / s, 550 cm / s, and 635 cm / s, respectively. Tıbbi maske örnekleri, sırasıyla 450 cm / s, 550 cm / s ve 635 cm / s sıvı çıkarma hızlarında test edilmiştir. Record the test results for each injection speed. Her enjeksiyon hızı için test sonuçlarını kaydedin.
Özellikler:
Püskürtme mesafesi | (300 ± 10) mm |
Test ortamı | Temperature (21 ± 5) ℃; Sıcaklık (21 ± 5) ℃; relative humidity (85 ± 10)% bağıl nem (85 ± 10)% |
Sıvı fırlatma hızı | 450cm / s; 450cm / s; 550 cm / s; 550 cm / s; 635 cm / s 635 cm / s |
Meme çapı | .80.84mm, uzunluk 12.7mm |
Güç | AC220V 50Hz |
İlgili kişi: Ms. Fiona Zhong
Tel: +86 135 3248 7540
Faks: 86-0769-3365-7986